Table of Contents
Advertisement
Operating Remote Controls
Before attempting to operate either one of the remote
controls, install the batteries as shown below.
Installing/Replacing Batteries
1
Turn each remote control face down.
2 Press down on the ridged area of each battery cover and slide
it off.
3 Install the "AAA" batteries in each compartment as shown.
4 Replace the covers and turn remotes over (face up).
Notes: Replace the batteries when the TV fails to respond to the remote
control.
If you programmed your master remote to control other components, you
may have to reprogram the code numbers when you change batteries.
Try not to press any buttons while changing batteries.
Never place anything heavy on top of the remote control or lay it upside-
down. This may accidentally depress the buttons for a long time and
discharge the batteries.
Do not mix new and used batteries or different brands of batteries.
If battery leakage occurs, wipe up the liquid inside the compartment and
replace the batteries with new ones.
Using the Remote Controls
Aim either remote control at your TV's remote control
sensor (located behind the TV screen). The remote
controls produce an invisible (infrared) beam that travels
in a straight line much as the beam of a flashlight. For this
reason, when operating either one of the remote controls,
you must point it directly at the front of the TV without
objects between that can block the infrared light beam.
Aim remote at your TV's remote control sensor
(located behind the TV screen).
Advertisement
Table of Contents
