Table of Contents
Advertisement
Audio Amplifier
If your amplifier is not part of a "system" that has its own
remote, connect it to the TV as shown here. (If the amplifier
is part of a system that has its own remote, you may choose to
connect it to the TV as shown below using the
jacks.)
With the connection shown here, you will be able to change
and mute volume with the TV's remote control. You will also
be able to remotely control the audio tone by adjusting the
TV's graphic equalizer.
Connection:
Connect the
and
jacks to the corresponding input jacks (such as
)
LEFT
or
TUNER, CD,
TAPE MONITOR) On
use the
jacks. If your amplifier is not stereo (mono),
PHONO
connect it to the TV's
owner's manual for the manufacturer's recommended
hookup.
Operation:
If desired, turn off the TV's internal speakers
using the
Speakers: int/ext/off
menu for the audio mode you have selected. Details
SETUP
are olt pages 24-36. Adjust the amplifier for normal listening.
You can also control sound with the
on the TV's remote.
Audio Cassette Recorder or Amplifier
If your amplifier is part of a "system" that has its own remote
control, connect it to the
jacks as shown here.
The "fixed level" audio signal present at these jacks is also
ideal for connecting an audio cassette recorder to record audio
from the TV.
This constant audio signal is not affected by pressing the
volume buttons on the TV's front panel or the TV's remote
control.
Connection:
Connect
AUDIO
jacks to the corresponding input jacks (such as
or
on the stereo amplifier or cassette
,
,
MONITOR)
TUNER
CD
TAPE
recorder. Do not use the
PHONO
stereo (mono), connect it to the TV's
recommended hookup.
Operation:
Select a TV channel and turn down the sound on
the TV, or turn off the TV's internal speakers using the
function on the
Speakers: int/ext/off
for the audio mode you have selected. Details are on
pages 24-36. Adjust sound with controls on the amplifier or
cassette recorder. If the amplifier or cassette recorder is part
of a "system" that has its own remote, use the system's
remote to adjust sound.
*Optional accessories are available from most dealers and
electronics supply stores.
Mail orderform is on page 75.
SELECT OUT
OUT
TS
-
AUDIO
PU
HI
FI OUT
the
amplifier. Do not
jack. Consult the amplifier
function on the
AUDIO ADJUST
and
buttons
VOLUME
MUTE
and
AUDIO OUTPUTS
SELECT
and
OUTPUTS
SELECT
AUX,
jacks. If your amplifier is not
jack. Consult
/
R
MONO
menu
AUDIO ADJUST SETUP
Audio/Video
Cables*
,
AUX
Back of TV
Back of TV
Audio/Video
(such os AHO69G)
Advertisement
Table of Contents
