Table of Contents
Advertisement
1 Press the MENU
MAIN MENU.
2 Repeatedly press the
+ or - batton to
highlight Setup in
white.
Press the MENU
3
button again to
display the SETUP
Repeatedly press the - button to move the highlight down
(one item per press).
Repeatedly press the + button to move the highlight up (one
item per press).
button again to enter or adjust the highlighted
Press the
MENU
function.
After a few seconds, the
SETUP
screen if no button is pressed. To exit the menu quicker,
highlight
and then press
Done
on the master remote control).
Antenna: input
A/B: Your TV has two separate antenna inputs on
the back labeled
and
A
ANT
ANT
such as a home antenna and
connected. To switch between the two antennas, press the
button when
Antenna: input A/B
between the two antennas.
Priority channels
allow you to create a separate channel memory
scan list consisting of up to six of your favorite channels. When the
function in the
Channels: normal/priority
pressing the
up or down button will only scan
priority,
CHANNEL
through the favorite channels you entered in the
Details are on page 42.
(channel) menu.
menu will disappear from the
(or press the
button
MENU
CLEAR
Two different signal sources,
B.
cable-TV system, can both be
function is highlighted to switch
is set to
MAIN MENU
PRIORITY CHAN
Scheduler
allows you to program your TV with
programs. It will mm on automatically, tune to a
and turn off automatically. You can select
scheduler only one time or you can select
only once or repeat every week at the same time. Press
button when
S c h e d u l e r
Details are on pages 44-45.
menu.
Channel memory
The
from the channel memory scan list, turn SAP on or off, turn
parental control on or off, and add or erase channel labels.
are on pages 30 and 47-50.
Clock set
The
function allows you to set the clock and day of the
week. The time and day-of-the-week display will then appear on
the TV screen whenever you turn on the TV, change channels, or
press the TV or
D I S P L A Y
are on page 7.
Autoprogram
commands the TV to automatically cycle through all
channels and place only active channels in the channel memory
scan list. The TV will then only stop on the channels in the scan
list when you press the
page 46.
VCR/cable setup
lets you program which channel the TV will
automatically tune when you press the
Details are on page 43.
Cable/air
The
function tells your TV whether you have a cable-TV
system or home antenna (air) connected to the antenna inputs.
M E N U
Your TV is so automatic that you will probably never need to
change this function. When your TV autoprograms, it
automatically adjusts the
need to override the automatic setting, press the
the
function is highlighted to change it.
Cable/air
Auto help: on/off
The
messages that appear on the bottom of the screen whenever a menu
is displayed. Press the
highlighted to turn the help messages
page 4.
up to three
specified channel,
o n c e t o run tic
(repeat) weekly to run
rpt.
is highlighted to display the
function allows you to add or erase channels
button on the master remote control.
up or down button.
C H A N N E L
or
function for you. If you ever
Cable/air
M E N U
function lets you turn on or turn off the help
button when the
Auto help
M E N U
off. Details are on
or
on
MENU
S C H E D U L E R
Details
Details
Details are on
button.
C A B L E
button while
function is
Advertisement
Table of Contents
