Table of Contents
Advertisement
These modes provide surround sound generation and require
rear speakers. There are three surround modes to choose
from. Matrix surround simulates surround sound from a
mono broadcast. Hall surround provides surround sound from
a stereo signal, and stadium surround delays the rear sound
longer than hall surround which gives you the feeling of being
in a larger area.
General Recommended Speaker Placement
for Best Surround Sound Audio
Connect these (optional)
speakers to connectors labeled
on the back of the TV.
EXTERNAL
Connect these speaker(s) to
speaker connector(s) labeled
on the back of the TV.
SURROUND
can easily select
MATRIX SURROUND, HALL SURROUND,
by repeatedly pressing the
STADIUM SURROUND
button on the master remote control. You'can also select
or
Matrix, Hall,
Stadium surr
shown below. Then you can
adjust the functions to your personal preferences.
Selecting Matrix Surr, Hall Surr, or Stadium Surr Modes
1
Connect (optional) external speakers to the
speaker connectors and surround speaker(s) to the
connector(s) on the back of the
SURROUND
connecting speakers are on pages 72-73.
2 Display the
menu.
AUDIO MODE
1
Press
to display the
MENU
MAIN MENU.
2 Press + or - to highlight the
Audio Adjust
function in
white.
Then press
again to
M E N U
display
the AUDIO ADJUST
menu.
4 Press the + or - button to
highlight the
function.
M o d e
Then press
to display
M E N U
the
menu.
AUDIO MODE
6 Press + or - to highlight
or
Matrix surr, Hall surr,
mode. Then
Stadium surr
MENU
press
to turn on
whichever mode is
highlighted.
3 Press
again to exit the
MENU
to the
menu.
AUDIO ADJUST
highlighted.
4 Press the
button to enter the
MENU
surround mode you have selected. If you have selected
matrix surround the setup menu is titled
you have selected hall or stadium surround the setup menu
is titled
.
SURROUND
(surround)
SURR
with the
menu as
AUDIO MODE
use the
menu to
SURROUND SETUP
EXTERNAL
menu and return
AUDIO MODE
will already be
Setup
menu for the
setup
MATRIX SETUP
5 Adjust the setup menu to your personal preference. Press
+ or-to highlight the function.
*Press
when the
MENU
highlighted to change the setting between
(internal), ext
hear sound from the TV's internal speakers. Select
ext if you have external front speakers and you
Speakers:
want to hear the sound from them instead of the internal
speakers. Select
sound from the internal or external front speakers.
*Press
when
MENU
display. Press + to increase or-to decrease the
VOLUME
TV's volume. This volume control raises and lowers the
volume of the internal, external, and surround speakers.
or
Note:
If the
VOLUME
the volume is not high enough, check the Volume
is set too low.
Press
when the
MENU
l
enter the
BALANCE
to adjust the left/right balance until the sound seems to
originate from a point halfway between the speakers.
*Press
when
MENU
highlighted to select either
Leave this function set
sound.
*Press
when
MENU
adjustment display. Press + to increase the
REAR VOLUME
volume from the rear surround speakers or - to decrease
the volume from the rear surround speakers.
Press
when the
MENU
l
to enter the
display is used to balance the left and right audio signals
coming into the set for optimum surround sound
performance. Most of the time you will want to leave
this at mid scale. If the sound coming from your
surround sound speaker(s) has a lot of voices (instead of
mostly background ambience), you may want to adjust
the
LA
INPUT BA
the
LA
INPUT BA
and - buttons to move to the right and to the left of the
scale. Stop at the point where voices are minimal in the
surround speaker(s) .
Press
when
MENU
l
menu.
Saving, Restoring, and Returning to Factory Settings
The TV will remember your settingsxven when you turn it
off. To prevent losing your personal settings because
someone changes them accidentally, you can save them using
the
.
MEMORY MENU
can restore them at a later date using the
If
.
also lets you easily restore the
MEMORY MENU
setup menu to its factory settings.
SURROUND
page 39.
Speakers: int/ext/off function is
or
off. Select Speakers: int to
off if you do not want any
Speakers:
is highlighted to enter the
Volume
display stops before it is at full volume and
Details are on page 24.
function is highlighted to
Balance
adjustment display. Then press + or -
(speaker):
Rear spkr
on/off
Rear spkr: on
to hear surround
to Rear spkr: on
is highlighted to enter the
Rear volume
function is highlighted
Input balance
display. The
INPUT BALANCE
display to minimize the voices. With
NCE
display on the TV screen, press the +
NCE
is highlighted to exit the setup
Done
After the settings have been saved, you
MEMORY MENU
Speakers: int
if it
limiter to see
function is
or
Rear spkr: off.
INPUT BALANCE
The
.
or
MATRIX SETUP
Details are on
Advertisement
Table of Contents
