Table of Contents
Advertisement
3 Enter command "sys stdio 0" to disable the SMT timeout, so the TFTP transfer will not
be interrupted. Enter command "sys stdio 5" to restore the five-minute SMT timeout
(default) when the file transfer is complete.
4 Launch the TFTP client on your computer and connect to the Prestige. Set the transfer
mode to binary before starting data transfer.
5 Use the TFTP client (see the example below) to transfer files between the Prestige and the
computer. The file name for the configuration file is "rom-0" (rom-zero, not capital o).
Note that the telnet connection must be active and the SMT in CI mode before and during the
TFTP transfer. For details on TFTP commands (see following example), please consult the
documentation of your TFTP client program. For UNIX, use "get" to transfer from the
Prestige to the computer and "binary" to set binary transfer mode.
27.2.7 TFTP Command Example
The following is an example TFTP command:
tftp [-i] host get rom-0 config.rom
where "i" specifies binary image transfer mode (use this mode when transferring binary files),
"host" is the Prestige IP address, "get" transfers the file source on the Prestige (rom-0, name of
the configuration file on the Prestige) to the file destination on the computer and renames it
config.rom.
27.2.8 GUI-based TFTP Clients
The following table describes some of the fields that you may see in GUI-based TFTP clients.
Table 93 General Commands for GUI-based TFTP Clients
COMMAND
Host
Send/Fetch
Local File
Remote File
Binary
Abort
Chapter 27 Firmware and Configuration File Maintenance
DESCRIPTION
Enter the IP address of the Prestige. 192.168.1.1 is the Prestige's default IP address
when shipped.
Use "Send" to upload the file to the Prestige and "Fetch" to back up the file on your
computer.
Enter the path and name of the firmware file (*.bin extension) or configuration file
(*.rom extension) on your computer.
This is the filename on the Prestige. The filename for the firmware is "ras" and for the
configuration file, is "rom-0".
Transfer the file in binary mode.
Stop transfer of the file.
Prestige 2302R Series User's Guide
251
Advertisement
Table of Contents
Troubleshooting
