Special Service Materials Reference (Locally Available) - Yanmar 6LPA-STP2 Service Manual

Special Service Materials (Locally Available)
12/05
Special Service Materials Reference
(Locally Available)
Material
Three Bond
Three Bond
Three Bond
Liquid gasket
Three Bond
Three Bond
Three Bond
®
Loctite TB1401
Adhesive
®
Loctite Super TB1330B
Pipe seal tape
O-ring kit
Lowcol Paste (Brand name)
EP lubricant Paste Spray (Brand name)
(molybdenum
disulfate)
Molypaste (Brand name)
NOTICE: It is recommended that liquid gasket
Three Bond® TB1212 should be used for service
work. Before providing service, observe the
cautions below:
1. Build up each sealant bead equally.
2. For bolt holes, apply liquid gasket to the inside
surface of each hole.
6LPA Service Manual
Contents (Typical)
200 g (1 kg also
®
No. 1 TB1101
available)
200 g (1 kg also
®
No. 2 TB1102
available)
®
No. 3 TB1103
200 g (1 kg also
®
No. 4 TB1104
available)
®
No. 10 TB1211
®
TB1212
5 m round tape
1.92-m diameter-1
2.42-m diameter-1
3.12-m diameter-1
3.52-m diameter-1
5.72-m diameter-1
© 2007 Yanmar Marine International
GENERAL SERVICE INFORMATION
Non-drying liquid gasket; solventless type, easy to
remove, superior seawater resistance, applicable to
various mating surfaces
Non-drying liquid gasket; easy to apply, superior water
and oil resistance, especially superior gasoline/fuel
resistance
Drying film; low viscosity and forming of thin film,
150 g
appropriate for mating surfaces of precision parts
Semi-drying viscoelastic material, applicable for non-flat
surfaces have indentions or protrusions, superior heat,
water and oil resistance
Solventless type silicone based sealant, applicable for
100 g
high temperature areas -50 to 250°C (122 to 482°F)
100 g Silicone based, non-fluid type, thick application possible
Prevention of loose fasteners, gasket leaks, and
200 g corrosion. Torque required to loosen fastener: 10 to
20% greater than tightened torque
50 g Excellent adhesion strength, locks fastener
semi-permanently
Sealing material for pipe threads. Ambient temperature
range: -150 to -200°C (302 to 392°F)
O-ring of any size can be prepared as required.
Including adhesives, release agents, cutters and jigs.
50 g
For assembly of engine cylinders, pistons, metals,
shafts, etc. Spray type application.
330 g
Prevention of seized threads at high temperatures.
50 g Applicable to exhaust and intake valves, stems, guides
and face.
3. Three Bond
TB1102 (Yellow) is used with a gasket. The use
of either of these sealant bonds without a
gasket alone is not effecive.
4. If a gasket is used, do not use sealant TB1212.
Features and Application
®
TB1104 (Gray) or Three Bond
®
3-47