Timing Belt
12/05
8. Remove the No. 1 timing pulley using a gear
puller (Figure 5-164, (1)).
Figure 5-164
(1)
Figure 5-164
9. Remove the pulley key.
6LPA Service Manual
Timing Belt Inspection
Timing Belt
NOTICE: NEVER bend, twist or turn the timing belt
inside out. NEVER contaminate the timing belt with
oil, water or steam (Figure 5-165).
Figure 5-165
0005162
Inspect the belt for the following conditions, if any of
the following conditions are present or the belt is
damaged, replace the timing belt.
• Breaking or parting at the joints (Figure 5-166).
• Check the timing belt cover and gasket for
damage and for correct installation.
Figure 5-166
© 2007 Yanmar Marine International
ENGINE
Figure 5-165
Figure 5-166
0005163
0005164
5-71