Yanmar 6LPA-STP2 Service Manual page 281

Starter
12/05
Bearing
1. Inspect the bearing by manually turning
(Figure 10-28) the bearing while applying an
inwards force. If you feel resistance or play in
the bearing, replace the bearing.
Figure 10-28
Figure 10-28
Replacing Bearing
1. Remove the front and rear bearings using a
special tool (Figure 10-29).
Figure 10-29
Figure 10-29
2. Press in a new front and rear bearing using the
a press (Figure 10-30).
6LPA Service Manual
Figure 10-30
1 – Front Bearing
0005416
2 – Rear Bearing
0005417
© 2007 Yanmar Marine International
STARTER MOTOR
(1)
Figure 10-30
(2)
0005418
10-13