Yanmar 6LPA-STP2 Service Manual page 202

FUEL SYSTEM
5. Install the fuel injection pipe to the fuel injection
nozzle and fuel injection pump (Figure 6-44).
Figure 6-44
Figure 6-44
6. Tighten the union nut onto the fuel injection
pump (Figure 6-45). Torque to: 250 kgf·cm,
24.52 N·m (18 lb-ft).
Figure 6-45
Figure 6-45
1 – No. 1
2 – No. 2
3 – No. 3
4 – No. 4
5 – No. 5
6 – No. 6
6-26
0005307
(2)
(6)
(3)
(5)
(4)
(1)
0005308
© 2007 Yanmar Marine International
7. Tighten the union nut to the fuel injection nozzle
and torque to: 250 kgf·cm, 24.52 N·m (18 lb-ft)
(Figure 6-46).
Figure 6-46
Figure 6-46
8. Install the 2 clamps with 2 nuts and torque to:
65 kgf·cm, 6.37 N·m (56 lb-in.).
9. Install 2 clamps with 4 nuts to the intake
manifold (Figure 6-47).
Figure 6-47
Figure 6-47
6LPA Service Manual
Fuel Injection Nozzle
0005309
0005310