Yanmar 6LPA-STP2 Service Manual page 275

Starter
12/05
Figure 10-6
( 2 )
( 3 )
( 4 )
Figure 10-6
1 – Starter Housing and Clutch Assembly
2 – Return Spring
3 – Plate Washer
4 – Bearing
5 – Idler Gear
5. Remove the steel ball through the clutch shaft
hole using a magnet (Figure 10-7).
Figure 10-7
Figure 10-7
6LPA Service Manual
6. Remove the 2 screws (Figure 10-8, (1)) and
end cover from the field frame.
Figure 10-8
( 1 )
( 5 )
0005393
7. Secure the rear of the spring tang using a
screwdriver (Figure 10-9) and remove the
brush from the brush holder. Remove the 4
brushes and then the brush holder.
Figure 10-9
0005394
8. Remove the armature (Figure 10-1, (24)) from
the field coil frame (Figure 10-1, (22)).
© 2007 Yanmar Marine International
STARTER MOTOR
( 1 )
Figure 10-8
0005396
Figure 10-9
( 1 )
0005395
10-7