Yanmar 6LPA-STP2 Service Manual page 306

ALTERNATOR
11. Install the rear cover (Figure 11-43, (4)) and
plate terminal (Figure 11-43, (3)) using 3 nuts
(Figure 11-43, (1)) and a bolt
(Figure 11-43, (2)).
Torque the bolt to:
39 kgf·cm, 3.82 N·m (33.8 lb-in.).
Torque the nuts to:
80A Models: 45 kgf·cm, 4.41 N·m (39.0 lb-in.)
100A Models: 46 kgf·cm, 4.51 N·m (40.0 lb-in.)
Figure 11-43
(1)
(1)
(4)
Figure 11-43
12. Install the terminal insulator and nut
(Figure 11-44, (1)).
Torque the nut to:
80A Models: 41.5 kgf·cm, 4.07 N·m (36.0 lb-in.)
100A Models: 66 kgf·cm, 6.47 N·m (57.2 lb-in.)
Figure 11-44
Figure 11-44
11-20
(1)
(2)
(3)
0004869
(1)
0004832
© 2007 Yanmar Marine International
13. After final assembly, rotate the rotor pulley to
ensure the rotor rotates smoothly
(Figure 11-45).
Figure 11-45
Figure 11-45
6LPA Service Manual
Alternator Service
0004871