Yanmar 6LPA-STP2 Service Manual page 240

LUBRICATION
13. Install the oil pan using 27 bolts and 3 nuts.
Uniformly tighten the nuts and bolts in several
steps to a final torque of 100 kgf·cm, 9.81 N·m
(86.8 lb-in.).
14. Install the timing gear. See Timing Gear
Installation on page 5-87.
15. Fill with engine oil. See Adding Engine Oil on
page 3-23.
16. Fill with engine coolant (fresh water). See
Checking and Adding Engine Coolant on
page 3-25.
17. Start the engine and check for oil leakage.
18. Check the oil level again, fill to the upper limit of
the oil dipstick as needed.
8-12
© 2007 Yanmar Marine International
6LPA Service Manual
Oil Pump