Kayaba Front Fork Adjustment - Husqvarna CR 125 2011 Workshop Manual

a
A
WR
b
C
WR
a
D
+
CR
b
C
CR
SETTINGS AND ADJUSTMENTS
CR 125 2011 - WR 125 2011

KAYABA front fork adjustment

- COMPRESSION (Fig. a)
(CR: TOP ADJUSTER; WR: LOWER ADJUSTER)
CR: -9 clicks
WR: -10 clicks
To reset standard calibration, turn adjuster screw (A) clockwise to reach the fully
closed position; then turn it back by the mentioned clicks. In order to obtain a
smooth braking action, turn the adjuster counter clockwise. Vice versa to obtain
a harder braking action.
H06714
- REBOUND (Fig. b)
(CR: LOWER ADJUSTER; WR: TOP ADJUSTER)
D
CR: -13 clicks
WR: -10 clicks
To reset standard setting, turn adjuster (C) clockwise to reach the fully closed
position; then, turn it back by the mentioned clicks. In order to obtain a smooth
braking action, turn the adjuster counter clockwise. Vice versa to obtain a harder
braking action.
- BLEEDING (Fig. a/b) (to carry out after each competition, or monthly).
H06716
Set the motorcycle on a central stand, release the fork fully extended and loosen
the bleed valve (D). Once this operation is over, tighten the valve.
Never force the adjuster screws beyond the maximum open and
closed positions.
A
_
H06990
H06715
D.25
Workshop Manual Ed. 06-2011