Husqvarna CR 125 2011 Workshop Manual page 191

A
3
2A
2
B
BRAKES
CR 125 2011 - WR 125 2011
3) Remove the reservoir cap (2) or (2A, 21 mm wrench) and the rubber gaiter
and fill the reservoir with fresh fluid.
4) Loosen the bleed valve (1) or (1A) and operate the brake lever (3) or the
brake pedal (3A) repeatedly until draining all fluid.
5) Slightly tighten the bleed valve (1) or (1A) and release the brake lever (3) or
pedal (3A).
6) Repeat steps (4) and (5) until the fluid flowing out of the hose looks clear and
free of air bubbles: now tighten the bleed valve (1) or (1A).
7) Top up with fluid up to level (A) or (B) and refit rubber gaiter and reservoir
2
cover.
After changing the fluid, you will need to bleed air from the circuit.
H06908
H07070
3A
H02835
L.9
Workshop Manual Ed. 06-2011