CR 125 2011 - WR 125 2011
11
12
11
H06747
2
3
1
H06754
1
H06749
2
H06753
GENERAL PROCEDURES
Spoiler removal
-
Remove the fuel tank as outlined in the relevant paragraph.
-
Using an 8 mm socket wrench, loosen the two screws (11) and remove the
left-hand side (12) and right-hand side (13) spoiler.
Voltage regulator removal (WR)
-
Remove: saddle and fuel tank as described in the relevant paragraphs.
-
Disconnect the connector (1).
-
Loosen the retaining screw (2) and remove the regulator (3).
(8 mm wrench)
Transducer removal (WR)
-
Remove: saddle and fuel tank as described in the relevant paragraphs.
-
Remove the spark plug cap (1).
-
Disconnect the connector (2).
3
-
Remove the retaining screws (3) and then the transducer (4).
(8 mm wrench)
4
E.13
Workshop Manual Ed. 06-2011