Adjustment Of The Clutch Control Lever - Husqvarna CR 125 2011 Workshop Manual

B
1
A
5
3
Workshop Manual Ed. 06-2011
SETTINGS AND ADJUSTMENTS
CR 125 2011 - WR 125 2011

Adjustment of the clutch control lever

To adjust the clutch control lever, you will need to adjust cable tension using the
adjuster on the lever.
V
- Shift the rubber protection (1).
- Work on the adjuster screw (2), turn it in the direction indicated by the arrow
(A) to decrease clearance, turn it in the direction indicated by the arrow (B)
to increase it.
There should be at least 10 mm (0.39 in.) free play (V) before the clutch
begins to disengage.
2
The adjustment can be also effected with tightener (3) set on the left of the
frame. Take care to tighten properly the lock nut. If the clutch slips under load
H06985
or drags in disengaged position after play has been adjusted, it must be taken
apart for inspection.
(3) Adjusting screw
(4) Locknut
4
(5) Rubber cap
H06680
D.8