Exhaust Valve Reassembly; Exhaust Valve Position Check - Husqvarna CR 125 2011 Workshop Manual

ENGINE ASSEMBLY
CR 125 2011 - WR 125 2011

Exhaust valve reassembly

To reassemble the exhaust valves, simply reverse the removal procedure
minding that with completely closed valves, the min. distance from the piston
must be equal to or grater than 0.4÷0.5 mm (0.0157÷0.0197 in.).
On bushings (A), check the wear of the seats holes for pin (B); if worn, replace
A
the parts.
B
H06621
Once engine reassembly is over, fit it back on the chassis resetting the origi-
nal and previously removed assemblies and cooling circuit connections. Per-
form the necessary adjustments as described in section "Settings and adjust-
ments".

Exhaust valve position check

Check the exhaust valve position in paragraph (see section D).
Workshop Manual Ed. 06-2011
H.18