1
5
4
3
H07016
Workshop Manual Ed. 06-2011
ELECTRICAL SYSTEM
CR 125 2011 - WR 125 2011
Rear wiring harness replacement (WR)
1
-
-
-
-
H06941
Handlebar switches
Measure continuity on the different switches using a meter. Replace any part
found to be faulty.
Left-hand switch (CR)
1 Engine stop button
POSITION
H07073
ON
OFF
Left-hand switch (WR)
The left commutator has the following controls:
1) Engine stop button (
2) HI = (
LO = (
1
3) TURN
To deactivate the indicator, press the control lever after its returning to center.
4) HORN = (
5) LIGHTS
2
Remove the left body panel as outlined in section E.
Remove the tail light as outlined in the relevant paragraph.
Disconnect connector (1) and cut clamps securing wiring harness to chas-
sis.
Disconnect rear turning indicator connectors, and remove wiring harness.
COLOUR
B-W
).
) Selection control High beam;
) Selection control of Low beam.
= Activation of left turn indicators (self cancelling);
= Activation of right turn indicators (self cancelling);
) Warning horn.
= Lighting control of lowbeams and high beam;
= Lighting control of position lights;
= Off.
M.24
Bk