Assembly - Husqvarna CR 125 2011 Workshop Manual

CR 125 2011 - WR 125 2011
A
C
A
SETTINGS AND ADJUSTMENTS

Assembly

To ensure tight fit, slightly (C) grease filter edge on side facing filter housing.
While re-inserting the filter into its housing, make surs that piece (A) is turned up-
wards and edge (B) is on the left lower side of the filter case. Reassemble the parts
previously removed.
If the element assembly is not installed correctly, dirt and dust may
enter and the engine resulting in rapid wear of the piston rings and
cylinder.
B
H02670
H06702
D.17
Workshop Manual Ed. 06-2011