Steering Modes Of The System; Hand Steering (Mode Selector: Hand) - Furuno FEA-2107-BB Operator's Manual

32. Steering With TOKYO KEIKI Autopilot PR-6000
4. Non-Follow up steering lever
5. Auto steering control knobs
6. Auto unit
7. Course setting knob
8. Remote control steering selection unit
9. Repeater unit
10. Repeater synchronising knob
11. Repeater switch
12. Helm unit
13. Steering wheel
14. System selection unit
15. System selection switch
16. Order rudder angle indicator
17. PS display lamps
18. Alarm unit
19. Max rudder angle selection unit
20. Max rudder angle selection switch
30.3

Steering Modes of the System

Note that all steering-related functions are available only if the ECDIS system is also connected to an optional
Autopilot PR-6000 processor.
The Autopilot PR-6000 has the following steering modes:
•

Hand steering (Mode selector: HAND)

•
Autopilot steering (Mode selector: AUTO)
•
NFU mode for Non-follow up steering mode (Mode selector: NFU)
•
Track mode automatic Route steering, RC/Nav (Mode selector: RC)
•
Remote Control steering on port wing, RC/P/W (Mode selector: RC), option
•
Remote Control steering on starboard wing, RC/S/W (Mode selector: RC), option
•
Remote Control steering on wheel house, RC/W/H (Mode selector: RC), option
•
Override steering method, option
30.3.1 Hand steering (Mode selector: HAND)
Set the Mode selection switch to "HAND".
In this mode the ECDIS system displays the rudder angle and steering mode.
30-2