Lost Heading From Ecdis (Autopilot Still Has Heading) - Furuno FEA-2107-BB Operator's Manual

Electronic chart display and information system (ecdis)
Hide thumbs Also See for FEA-2107-BB:
Table of Contents

Advertisement

29.8.2

Lost heading from ECDIS (Autopilot still has heading)

Associated alarms
Sensor alarm, for example
Alarm "4005: Gyro error" or
"4006: Gyro error."
Within few
Alarm "2002 No heading
seconds
available" and alarm "2000
Filter: position Unreliable".
Alarm "2497 Route Stop-Sensor
fail"
After Alarm
If vessel is in linear part of route
"2497 Route
alarm "2471 AP mode conflict -
Stop-Sensor
Use AUTO" in ECDIS and
fail."
alarm "CAUTION-01 CHANGE
TO AUTO" on Autopilot control
panel
If vessel is in turning part of
route alarm "2515 Conflict-
NAVI compl. Turn" in ECDIS
and alarm "CAUTION-01 NAVI
COMPL TURN" in Autopilot
control panel. After the turn is
completed the alarm changes in
ECDIS as "2471 AP mode
conflict - Use AUTO" and in
Autopilot control panel as
"CAUTION-01 CHANGE TO
AUTO "
29. Steering With YOKOGAWA Autopilot PT-500A
Expected system performance
If ship is in linear part, actual
heading is used as set heading.
If ship is turning, last-set heading
and radius are used to complete the
turn as long as Autopilot mode
selector is kept in position "NAVI".
What end operator
should do
Acknowledge alarms.
Study situation.
Acknowledge alarms.
Study situation.
Acknowledge alarms
Study situation.
If vessel is in linear part
then Change steering mode
to AUTO.
If vessel is in turning state,
then either keep steering
mode NAVI to complete
the turn or change to
steering mode AUTO to
stop turning.
29-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fea-2107Fea-2807

Table of Contents