Choosing Objects Used In Chart Alarms - Furuno FEA-2107-BB Operator's Manual

11.2.2

Choosing objects used in chart alarms

You can also include calculation areas that have to be noted when sailing (for example, restricted areas). To include
these areas in chart alarms, do the following:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area then push the left mouse
button.
2. Choose Initial Settings from the menu then push the scrollwheel.
3. Place the cursor on the triangle inside the Initial Settings dialog box to open the Initial Settings menu.
4. Choose Chart Alarm parameters then push the scrollwheel.
5. Click the Chart Alarms tab to show the Chart Alarms dialog box. In the Ignore box at the top of the window, use
the left mouse button to click the alarm item you wish to process.
6. Choose what alarm type you desire. Click the Indication button to display visual alarm, or Alarm button to get
the audible alarm. The item chosen is moved from the Ignore box to the Indication or Alarm box as appropriate.
7. To remove an alarm, click it in the Indication or Alarm box with the left mouse button then click the Ignore
button. To change an alarm alert method, click it in the Indication or Alarm box with the left mouse button then
click the Indication or Alarm button as appropriate.
8. Click the Parameters tab with the left mouse button.
9. Time and sector angle are explained in section 11.4 Activating Own Ship Check. Set them appropriately.
11. Chart Alarms
11-3