21.6.4
Replying to a safety message
To reply to a safety message, proceed as follows:
Set Std Display
1. Display the Safety Message dialog box.
2.
Check Enable changes.
3. In the Filter field, choose Received from the upper box and the message to
reply to from the lower box.
4. Choose Message Type and Channel as appropriate referring to section 21.6.2
Creating a new safety message.
5. Enter your reply in the text window.
6. Place the cursor on the triangle to open the sub menu.
7. Choose Send Message then push the scrollwheel.
21. AIS Target Functions
21-13