Errors - Furuno FEA-2107-BB Operator's Manual

30. Steering With TOKYO KEIKI Autopilot PR-6000
30.6.2

Errors

Errors should not happen during normal operation. They are related to internal problems.
Integrated operation related alarms
•
The ECDIS control unit's ALARM ACK lamp goes on.
•
The type of alarm is displayed on the ECDIS screen as number and text.
•
Alarm can be acknowledged by pushing the ECDIS control unit's ALARM ACK button.
Below is a list of typical alarms.
2480 Auto pilot receive error
2488 Steering Stop-System Fail
30.7 Autopilot Dialog Box for Tokyo Keiki PR-6000
You can open the autopilot display on the sidebar of ECDIS. This displays shows various information about
Autopilot state.
To activate the autopilot display:
1. Move the cursor over the route monitor window.
2. The mouse guidance box shows "Menu/ /Select Sidebar". Press the right mouse button to open the Sidebar
menu.
3. Select Autopilot from the menu.
Radius calculated
for set ROT
Failure at Autopilot
(red text)
Steering mode can be:
HAND: Hand steering
AUTO: Autopilot steering
NFU: NFU Steering
OVERRID: Override steering
RC/NAV-GOTO OS: Track steering in Open Sea mode
30-22
Autopilot
RC/NAV-GOTO OS
Set CSE 227.1˚
Set course
Radius
ROT
OffCrs Rud Limit
Rudder servo
Off track
Autopilot dialog box
Steering mode
1.0nm
Set ROT
16.3˚/min
Caution at Autopilot
(red text)
< 193 m Off track from
planned