3. ECDIS Display
3.4
Controlling Planning and Monitoring Modes on
the ECDIS Display
A route, a user chart or pilot data can be displayed at the top of the electronic chart in the status bar, in either the
planning mode or the monitoring mode.
To choose desired mode, put the cursor on the text Route, User Chart or PilotData on the status bar. A drop-down
dialog box appears, where you can choose either Monitor or Plan by clicking the appropriate button with the left
mouse button. With user chart or pilot data, only the planning mode or the monitoring mode can be displayed in the
status bar. (Displayed selected may be activated with a radio button. See the figure below.)
North Up TM
ECDIS only
3-12
HDG
070.0°
SPD
1.8
(CALC)
Kt
SB
(POSN)
1.7
Kt
COG
(POSN)
045.1°
SOG
2.0
(POSN)
Kt
Posn true