Knowing Up-To-Date Status Of A Chart From An Renc - Furuno FEA-2107-BB Operator's Manual

8. Vector Chart Material
8.7.2

Knowing up-to-date status of a chart from an RENC

To keep charts up-to-date, you should check for updates with an RENC weekly. The ECDIS compares charts used to
Product List of an RENC. If a Permanent Warning appears on the chart display of ECDIS (at the upper left corner),
this means that the charts used were checked against the Product List and at least one of the charts used is not up-to-
date. See the Permanent Warning below.
The information of available charts and their up-to-date status is available both in the catalogue and in the Chart
viewing dates window.
The easiest method to check if charts are up-to-date is to view the catalogue and check that the names of all
required charts appear in green. The names of charts that are not up-to-date appear in orange. For further
details see section 8.7.1 Viewing the coverage of an RENC service.
You can also use the Chart viewing dates window in the Chart menu when you have doubt that some charts are not
up-to-date or the Permanent Warning shown above is displayed.
8-42
1.
2.
3.
4.
5.
6.