Reading A File From Planning Or Navigation Station; Loading User Chart And Route Files Of Former Vector System Format; Saving User Chart And Route Files In Former Vector System Format - Furuno FEA-2107-BB Operator's Manual

17.9 Reading a File from Planning or Navigation
Station
If there are two ECDIS workstations connected via a LAN, it is possible to read files from planning station to
navigation station and vice versa.
1. Select desired menu.
2. Choose Backup and Restore command from menu.
3. Choose backup drive from the Backup device field.
4. From the Backup Device field, choose desired file.
5. Click the Restore button in the Backup Device field.
17.10 Loading User Chart and Route Files of Former
Vector System Format
Route and user chart files can be read in vector system format (Inc) files. When loading Inc format files, the ECDIS
converts the files to the format used with the ECDIS. To do this, do the following:
1. Choose desired menu.
2. Choose Backup and Restore from the menu.
3. Choose backup drive from the Backup device field.
4. From the Backup Device field, choose desired file.
5. Click the Restore button in the Backup Device field.
17.11 Saving User Chart and Route Files in Former
Vector System Format
The Route and User chart files can be read in vector system format (Inc). When moving files from the ECDIS to a
backup device the ECDIS converts the file to Inc format.
To do this:
1. Choose desired menu.
2. Choose Backup and Restore from the menu.
3. From the Hard Disk field, choose desired file then choose Backup file format as Inc.
4. Choose backup drive from the Backup device field.
5. Click the Backup button in the Hard Disk field.
17. Backup Operations
17-5