Human Interface Log - Furuno FEA-2107-BB Operator's Manual

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2107-BB:

Table of Contents

18. Common Reference System

Human interface log

The human interface log is used to analyse and diagnose system operation. Service personnel can use this log to

check the system for proper operation. To activate the human interface log, do the following:

1. Place the cursor below the chart scale indication, confirm that Initial

Settings is shown in the mouse functions area then push the right

mouse button.

2. Place the cursor on the triangle in the dialog box to display the menu

3. Choose Access Server and Diagnostic from the menu and choose

Human Interface log from the sub menu.

Fea-2107 Fea-2807