16. Pilot Data
16.3
Choosing Pilot Data to use in Monitoring Mode
Pilot data that is for system use is displayed in the pilot data field on the status bar. If the text "PilotData" is red this
means that the workstation is in the planning mode for pilot data. To activate the monitoring mode and choose pilot
data for the monitoring mode, do the following:
North Up TM
ECDIS only
16-4
Place cursor here,
spin scrollwheel to
HDG
070.0°
choose pilot data
SPD
1.8
(CALC)
Kt
SB
(POSN)
1.7
Kt
and push scrollwheel.
COG
(POSN)
045.1°
SOG
(POSN)
2.0
Kt
Posn true