22. Radar Overlay
22.2
Activating Radar Overlay on the ECDIS
Radar overlay can be output to the ECDIS and shown on its display. Like details on Vector charts (S57), the radar
overlay can be displayed or removed from the chart display. The Mariner page in the Chart Display dialog box
enables or disables the radar overlay. You can choose how to display the radar overlay with the Radar selector on
the status bar. To activate the radar overlay, do the following:
2.
1.
1. Spin the scrollwheel to show Chart Display/Info/Standard Display in the mouse functions area then push the left
mouse button. Click an arrow tab in the dialog box until the Mariner page is displayed. Click the radio button
Std or Oth in the Radar Overlay window.
2. Place the cursor on Radar in the status bar then push the left mouse button.
3. In the Mode window, choose "ECDIS only" to show ECDIS only, or choose "ECDIS and Radar" to overlay
radar image on ECDIS.
4. Adjust radar echo image as appropriate.
22-2
3.
(In case of Radar Overlay Card)