Advertisement
14–142
14 (0.551)
23.2 (0.913)
A
B
(mm (in.))
Adhesive
B
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
20.
INSTALL UNION
(a)
Mark the standard position away from the edge, onto the
water hose union as shown in the illustration.
9 (0.354)
C
A62791
(b)
Apply adhesive to the water hose union hole of the cylin-
der head.
Adhesive:
Part No. 08833–00070, THREE BOND 1324 or equiva-
lent.
A62792
(c)
Using a press, press in a new water hose union until the
standard marks come to the level of the cylinder head sur-
face.
Standard protrusion:
A
A 29 mm (1.142 in.)
B 66.5 mm (2.618 in.)
C
C 24 mm (0.945 in.)
NOTICE:
Install the water hose union within 3 minutes after ap-
S
A62793
plying adhesive.
Do not put into coolant within an hour after installing.
S
–
CYLINDER HEAD ASSY
Advertisement
