Advertisement
14–86
23.
REMOVE CRANKSHAFT POSITION SENSOR PLATE NO.1
24.
REMOVE CHAIN TENSIONER SLIPPER
(a)
Remove the bolt and chain tensioner slipper.
Upward
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
22.
(a)
A30848
25.
(a)
NOTICE:
S
S
A30857
26.
(a)
A10079
Set Key
A62170
–
CHAIN SUB–ASSY
REMOVE TIMING GEAR COVER OIL SEAL
Using a screwdriver, remove the oil seal.
REMOVE CHAIN SUB–ASSY
Remove the timing chain with the crankshaft timing gear
plying screwdrivers as shown in the illustration.
Put shop rag to protect the engine.
In case of revolving the camshafts with the chain off
the sprockets, turn the crankshaft 1/4 revolution for
valves not to touch the pistons.
INSTALL CHAIN SUB–ASSY
Set No. 1 cylinder to TDC/compression.
(1)
Turn the hexagonal wrench head portion of the
camshafts, and align the point marks of the cam-
shaft timing sprockets.
(2)
Using a crankshaft pulley bolt, turn the crankshaft
and set the set key on the crankshaft upward.
Advertisement
