Advertisement
Front Side:
49.
SEPARATE VANE PUMP ASSY (See page 51–8)
NOTICE:
Do not disconnect the hose.
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
(c)
Remove the through bolt and nut, then detach the engine
mounting insulator from the vehicle.
A55685
(d)
Remove the 6 bolts, as shown in the illustration.
(e)
Carefully, remove the engine with transaxle from the ve-
hicle.
A50289
(f)
Install the 2 engine hangers with the 2 bolts.
Rear Side:
Part No.:
12281–15040 for No. 1 engine hanger
12281–22021 for No. 2 engine hanger
91512–B1016 for bolt
Torque: 38 N⋅m (387 kgf⋅cm, 28 ft⋅lbf)
HINT:
Be sure to install the engine hanger (12281–22021) to the front
side of the engine and the engine hanger (12281–15040) to the
A62830
rear side.
(g)
Using the chain block and engine sling device, hang the
engine assembly.
50.
REMOVE FRONT SUSPENSION CROSSMEMBER
W/CENTER MEMBER
(a)
Remove the through bolt and nut, then detach the engine
mounting insulator FR from the engine mounting bracket.
A62711
–
PARTIAL ENGINE ASSY (April, 2003)
14–31
Advertisement
