Advertisement
14–106
Seal Packing
A
A
B
A
A
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
19.
(a)
(b)
NOTICE:
S
S
A62182
S
(c)
A
A
B
A
A
A
A65687
20.
(a)
A64023
21.
(a)
A64022
–
CAMSHAFT
INSTALL CYLINDER HEAD COVER SUB–ASSY
Remove any old packing (FIPG) material.
Apply seal packing to 2 locations as shown in the illustra-
tion.
Seal packing: Part No. 08826–00080 or equivalent
Remove any oil from the contact surface.
Install the cylinder head cover within 3 minutes after
applying seal packing.
Do not put into engine oil 2 hours after installing.
Install the cylinder head cover and 3 cable brackets with
the 9 bolts, 2 seal washers and 2 nuts. Uniformly tighten
the bolts and nuts, in the several passes.
Torque:
A 11 N⋅m (112 kgf⋅cm, 8 ft⋅lbf)
B 9.0 N⋅m (92 kgf⋅cm, 80 in⋅lbf)
INSTALL IGNITION COIL ASSY
Install the 4 ignition coils with the 4 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
INSTALL ENGINE WIRE
Install the engine wire with the bolt and nut.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
Advertisement
