Advertisement
121. INSTALL COMPRESSOR AND MAGNETIC CLUTCH (W/ AIR CONDITIONING)
(See page 55–34)
122. INSTALL CLUTCH RELEASE CYLINDER ASSY (M/T TRANSAXLE) (See page 41–17)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
120. INSTALL RETURN TUBE SUB–ASSY
(a)
A
B
A65809
123. INSTALL CRUISE CONTROL ACTUATOR ASSY (W/
(a)
(b)
A65807
124. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
(a)
(b)
(c)
(d)
(e)
A66032
(f)
(g)
(h)
A65177
–
PARTIAL ENGINE ASSY (April, 2003)
Install the return tube with 2 bolts.
Torque:
5.0 N⋅m (51 kgf⋅cm, 44 in.⋅lbf) for bolt A
7.8 N⋅m (80 kgf⋅cm, 69 in.⋅lbf) for bolt B
CRUISE CONTROL)
Install the actuator with the 2 bolts.
Torque: 6.0 N⋅m (61 kgf⋅cm, 53 in.⋅lbf)
Connect the actuator connector.
Install the air cleaner case with the 3 bolts.
Torque: 7.0 N⋅m (71 kgf⋅cm, 62 in.⋅lbf)
Connect the wire harness clamp, connector and hose.
Install the air cleaner filter element.
Install the air cleaner cap.
Connect the air cleaner hose.
Connect the 3 vacuum hoses, as shown in the illustration.
Connect the VSV connector.
Connect the intake air flow meter connector.
14–43
Advertisement
