Advertisement
14–38
90.
INSTALL ENGINE OIL PRESSURE SWITCH ASSY (See page 17–1)
91.
INSTALL THERMOSTAT (See page 16–11)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (April, 2003)
88.
INSTALL CRANKSHAFT POSITION SENSOR
(a)
Install the crankshaft position sensor with the 2 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
B00086
89.
INSTALL CAMSHAFT POSITION SENSOR
(a)
Install the camshaft position sensor with the bolt.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
B00084
92.
INSTALL WATER INLET
(a)
Install the water inlet with the 2 nuts.
Torque: 11 N⋅m (112 kgf⋅cm, 8 ft⋅lbf)
A64028
93.
INSTALL WATER BY–PASS PIPE NO.1
(a)
Install a new gasket and water by–pass with the 2 nuts
and 2 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
A64027
Advertisement
