Advertisement
Plunger
Push
Seal Packing
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
HINT:
If the plunger does not spring out, press the slipper into the
chain tensioner with a screwdriver so that the hook is released
from the knock pin and the plunger springs out.
Turn
A62181
14.
(a)
A11858
15.
(a)
A64005
16.
(a)
(b)
NOTICE:
S
S
A62182
S
–
VALVE CLEARANCE
(4)
Turn the crankshaft clockwise, and check that the
slipper is pushed by the plunger.
INSTALL V–RIBBED BELT TENSIONER ASSY
Install the V–ribbed belt tensioner with the nut and bolt.
Torque:
29 N⋅m (296 kgf⋅cm, 21 ft⋅lbf) for Nut
69 N⋅m (704 kgf⋅cm, 51 ft⋅lbf) for Bolt
INSTALL
ENGINE
SUB–ASSY RH
Install engine mounting insulator RH with the 4 bolts and
the 2 nuts.
Torque: 52 N⋅m (530 kgf⋅cm, 38 ft⋅lbf)
INSTALL CYLINDER HEAD COVER SUB–ASSY
Remove any old packing (FIPG) material.
Apply seal packing to 2 locations as shown in the illustra-
tion.
Seal packing: Part No. 08826–00080 or equivalent
Remove any oil from the contact surface.
Install the cylinder head cover within 3 minutes after
applying seal packing.
Do not put into engine oil 2 hours after installing.
MOUNTING
INSULATOR
14–13
Advertisement
