Advertisement
14–44
126. INSTALL BATTERY
Torque:
5.0 N⋅m (51 kgf⋅cm, 44 in.⋅lbf) for bolt
3.5 N⋅m (36 kgf⋅cm, 31 in.⋅lbf) for nut
127. INSTALL RADIATOR SUPPORT UPPER (W/ AIR CONDITIONING)
(a)
Install the 2 radiator support uppers with the 2 bolts.
Torque: 19 N⋅m (194 kgf⋅cm, 14 ft⋅lbf)
129. INSTALL FRONT WHEELS
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
130. ADD AUTOMATIC TRANSAXLE FLUID (A/T TRANSAXLE)
131. ADD ENGINE OIL
132. ADD COOLANT (See page 16–7)
133. CHECK FOR ENGINE OIL LEAKS
134. CHECK FOR ENGINE COOLANT LEAKS (See page 16–7)
135. CHECK FUEL LEAK
136. CHECK FOR EXHAUST GAS LEAKS
137. INSPECT CHECK IDLE SPEED AND IGNITION TIMING (See page 14–1)
SST
09843–18040
138. INSPECT CO/HC (See page 14–1)
139. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT (See page 26–5)
140. CHECK ABS SPEED SENSOR SIGNAL (W/ ABS)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (April, 2003)
125. INSTALL BATTERY CARRIER
(a)
Install the battery carrier with the 4 bolts.
Torque: 13 N⋅m (133 kgf⋅cm, 10 ft⋅lbf)
C80159
128. INSTALL CYLINDER HEAD COVER NO.2
(a)
Install the cylinder head cover with the 2 nuts and 2 clips.
Torque: 7.0 N⋅m (71 kgf⋅cm, 62 in.⋅lbf)
A65077
Advertisement
