Advertisement
34.
REMOVE CRANKSHAFT POSITION SENSOR PLATE NO.1
35.
REMOVE CHAIN TENSIONER SLIPPER
(a)
Remove the bolt and chain tensioner slipper.
36.
REMOVE CHAIN VIBRATION DAMPER NO.1
(a)
Remove the 2 bolt and chain vibration damper.
39.
REMOVE OIL LEVEL GAGE SUB–ASSY
(a)
Remove the oil level gage from the oil level gage guide.
41.
SEPARATE WATER BY–PASS PIPE NO.1
(a)
Remove the 2 bolts installing the water by–pass pipe.
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET
37.
REMOVE CHAIN SUB–ASSY
(a)
Remove the timing chain with the crankshaft timing gear
plying screwdrivers as shown in the illustration.
NOTICE:
Put shop rag to protect the engine.
S
In case of revolving the camshafts with the chain off
S
the sprockets, turn the crankshaft 1/4 revolution for
valves not to touch the pistons.
A30857
38.
REMOVE INTAKE MANIFOLD
(a)
Disconnect the 2 water hoses from the throttle body.
(b)
Disconnect the 2 vacuum hoses from the intake man-
ihold.
(c)
Remove the 4 bolts, 2 nuts, 2 wire brackets, the intake
manihold and throttle body assembly.
(d)
Remove the gasket from the intake manihold and throttle
body assembly.
A14660
40.
REMOVE OIL LEVEL GAGE GUIDE
(a)
Remove the bolt and oil level gage guide.
A64026
14–117
Advertisement
