Advertisement
14–116
Push
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET
29.
REMOVE
MOUNTING BRACKET
(a)
Remove the 3 bolts and transverse engine engine mount-
ing bracket.
A12816
30.
REMOVE CRANK POSITION SENSOR
(a)
Remove the 2 bolts installing the crank position sensor.
B00086
31.
REMOVE CHAIN TENSIONER ASSY NO.1
(a)
Remove the 2 nuts and chain tensioner.
NOTICE:
Be sure not to revolve the crankshaft without the chain ten-
sioner.
A62178
32.
REMOVE TIMING CHAIN OR BELT COVER
SUB–ASSY
(a)
Remove the 11 bolts and nuts.
(b)
Using a torx wrench socket (E8), remove the stud bolt.
(c)
Remove the timing chain cover by prying the portions be-
tween the cylinder head and cylinder block with a screw-
driver.
NOTICE:
Be careful no tot damage the contact surfaces of the timing
A10076
chain cover, cylinder head and cylinder block.
33.
REMOVE TIMING GEAR COVER OIL SEAL
(a)
Using a screwdriver, remove the oil seal.
A30848
TRANSVERSE
ENGINE
ENGINE
Advertisement
