Advertisement
14–30
32.
REMOVE FRONT DOOR SCUFF PLATE RH (See page 76–21)
33.
REMOVE COWL SIDE TRIM BOARD RH (See page 71–10)
34.
REMOVE COLUMN HOLE COVER SILENCER SHEET
(a)
Remove the 2 clips and column hole cover silencer sheet.
35.
SEPARATE STEERING INTERMEDIATE SHAFT (See page 51–18)
36.
REMOVE FLOOR PANEL BRACE FRONT
(a)
Remove the 2 nuts and floor panel brace front.
37.
REMOVE EXHAUST PIPE ASSY FRONT (See page 15–2)
38.
REMOVE FRONT AXLE HUB LH NUT (See page 30–6)
SST
09930–00010
39.
REMOVE FRONT AXLE HUB RH NUT (See page 30–6)
SST
09930–00010
40.
SEPARATE TIE ROD END SUB–ASSY LH (See page 30–6)
SST
09628–62011
41.
SEPARATE TIE ROD END SUB–ASSY RH (See page 30–6)
SST
09628–62011
42.
SEPARATE FRONT STABILIZER LINK ASSY LH (See page 51–18)
43.
SEPARATE FRONT STABILIZER LINK ASSY RH (See page 51–18)
44.
SEPARATE FRONT SUSPENSION ARM SUB–ASSY LOWER NO.1 LH (See page 30–6)
45.
SEPARATE FRONT SUSPENSION ARM SUB–ASSY LOWER NO.1 RH (See page 30–6)
46.
SEPARATE FRONT AXLE ASSY LH (See page 30–6)
47.
SEPARATE FRONT AXLE ASSY RH (See page 30–6)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (April, 2003)
31.
SEPARATE RETURN TUBE SUB–ASSY
(a)
Separate the vane pump oil reservoir from the oil reser-
voir bracket.
(b)
Remove the 2 bolts installing the return tube.
A65809
48.
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
(a)
Set the engine lifter.
(b)
Remove the 4 bolts, 2 nuts and engine mounting insula-
tor.
A64005
Advertisement
