Advertisement
14–8
Paint Mark
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
VALVE CLEARANCE
10.
REMOVE FAN AND GENERATOR V BELT
(a)
Turn the V–ribbed belt tensioner slowly clockwise and
loosen it. Then, remove the fan and generator V belt and
put back the V–ribbed belt tensioner little by little and fix
it quietly.
A60622
11.
REMOVE
SUB–ASSY RH
(a)
Remove the PS oil pump reservoir and put it aside.
(b)
Place a wooden block between the jack and engine, and
set the jack, then remove the 4 bolts, the 2 nuts and en-
gine mounting insulator RH.
A01045
A64005
12.
REMOVE V–RIBBED BELT TENSIONER ASSY
(a)
Remove the bolt, nut and V–ribbed belt tensioner.
HINT:
Handle a jack up and down to remove the bolt.
A11858
13.
ADJUST VALVE CLEARANCE
NOTICE:
Be sure not to revolve the crankshaft without the chain ten-
sioner.
(a)
Set the No. 1 cylinder to the TDC/compression.
(b)
Place match marks on the timing chain and camshaft tim-
ing sprockets.
A62186
ENGINE
MOUNTING
INSULATOR
Advertisement
