14–124
Raise
Push
Hook
Pin
Push
65.
INSTALL WATER PUMP ASSY (See page 16–8)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET
62.
INSTALL CHAIN TENSIONER ASSY NO.1
(a)
Check the O–ring is clean, and set the hook as shown in
the illustration.
A62177
(b)
Apply engine oil to the chain tensioner and install it withe
2 nuts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
NOTICE:
When installing the tensioner, set the hook again if the
hook release the plunger.
A62178
63.
INSTALL CRANK POSITION SENSOR
(a)
Install the crank position sensor with the 2 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
B00086
64.
INSTALL TRANSVERSE ENGINE ENGINE MOUNTING
BRACKET
(a)
Install the transverse engine engine mounting bracket
with the 3 bolts.
Torque: 47 N⋅m (479 kgf⋅cm, 35 ft⋅lbf)
A12816