Advertisement
14–144
SST
Gray Surface
Intake:
SST
Pin Punch 5
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
23.
INSTALL VALVE STEM OIL O SEAL OR RING
(a)
Apply a light coat of engine oil to a new valve stem oil
seals.
NOTICE:
Be very careful to assemble the oil seal for intake and ex-
haust. Assembling the wrong one may cause a failure.
HINT:
The intake valve stem oil seal is gray and exhaust valve stem
oil seal is black.
(b)
Using SST, push in the valve stem oil seals.
SST
Black Surface
Exhaust:
A65697
24.
INSTALL VALVE
(a)
Place the cylinder head on wooden blocks.
(b)
Install the valves, inner compression springs and valve
Wooden
spring retainers to the cylinder head.
Block
(c)
Using SST, compress the inner compression spring, and
place the 2 valve spring retainer locks around the valve
stem.
SST
A65688
(d)
Using a pin punch 5, lightly tap the valve stem tip to en-
sure a proper fit.
NOTICE:
Be careful not to damage the valve stem tip.
A65698
25.
INSTALL VALVE LIFTER
(a)
Apply a light coat of engine oil to the valve lifters.
(b)
Install the valve lifters to the cylinder head.
A62891
–
CYLINDER HEAD ASSY
09201–41020
09202–70020 (09202–00010, 09202–01010,
09202–01020)
Advertisement
