Advertisement
101. INSTALL CLUTCH DISC ASSY (M/T TRANSAXLE) (See page 42–18)
SST
09301–00210
102. INSTALL CLUTCH COVER ASSY (M/T TRANSAXLE) (See page 42–18)
SST
09301–00210
103. INSTALL MANUAL TRANSAXLE ASSY (M/T TRANSAXLE) (See page 41–17)
104. INSTALL AUTOMATIC TRANSAXLE ASSY (A/T TRANSAXLE) (See page 40–9)
105. INSTALL STARTER ASSY (See page 19–4)
107. INSTALL VANE PUMP ASSY (See page 51–8)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (April, 2003)
106. INSTALL FRONT SUSPENSION CROSSMEMBER
W/CENTER MEMBER
(a)
Attach the engine and transaxle assembly to the suspen-
sion crossmember and engine mounting member.
(b)
Install the bolt holding the rear engine mounting bracket
to the mounting insulator.
TMMC, NUMMI made:
Torque: 65 N⋅m (663 kgf⋅cm, 48 ft⋅lbf)
TAKAOKA, TAL made:
A61180
Torque: 87 N⋅m (887 kgf⋅cm, 64 ft⋅lbf)
(c)
Install the bolt holding the front engine mounting bracket
to the mounting insulator.
Torque: 52 N⋅m (530 kgf⋅cm, 38 ft⋅lbf)
A62711
108. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
(a)
Set the engine with transaxle on the engine lifter.
(b)
Install the engine with transaxle to the vehicle.
(c)
Temporarily, install the suspension crossmember and 6
bolts.
(d)
Install the engine mounting insulator LH.
Torque: 80 N⋅m (816 kgf⋅cm, 59 ft⋅lbf)
(e)
Install the engine mounting insulator RH.
Torque: 52 N⋅m (530 kgf⋅cm, 38 ft⋅lbf)
A50289
14–41
Advertisement
