Advertisement
Mark
Mark
Groove
SST
28.
REMOVE WATER PUMP ASSY (See page 16–8)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
25.
(a)
Mark
(b)
HINT:
If not, turn the crankshaft 1 revolution (360_) and align the
marks as above.
Timing Chain
Cover Surface
A62185
26.
(a)
(b)
A62837
27.
(a)
HINT:
Handle a jack up and down to remove the bolt.
A11858
–
CYLINDER HEAD GASKET
SET NO. 1 CYLINDER TO TDC/COMPRESSION
Turn the crankshaft pulley, and align its groove with timing
mark "0" of the timing chain cover.
Check that the point marks of the camshaft timing sprock-
et and VVT timing sprocket are in straight line on the tim-
ing chain cover surface as shown in the illustration.
REMOVE CRANKSHAFT PULLEY
Using SST, remove the pulley bolt.
SST
09960–10010 (09962–01000, 09963–01000)
Remove the crankshaft pulley from the crankshaft.
REMOVE V–RIBBED BELT TENSIONER ASSY
Remove the bolt, nut and V–ribbed belt tensioner.
14–115
Advertisement
