Advertisement
SST
6
14
(mm (in.))
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
(e)
Heat the cylinder head to 80 – 100_C (176 – 212_F).
A62906
(f)
Place the cylinder head on wooden blocks.
(g)
Using SST, tap in a new valve guide bushing to the speci-
fied protrusion height.
SST
Protrusion height: 8.7 – 9.1 mm (0.343 – 0.358 in.)
Wooden
Block
A65694
(h)
Using a sharp 5.5 mm reamer, ream the valve guide bush-
ing to obtain the standard specified clearance.
Standard oil clearance:
Intake 0.025 – 0.060 mm (0.0010 – 0.0024 in.)
Exhaust 0.030 – 0.065 mm (0.0012 – 0.0026 in.)
A65582
19.
INSTALL STRAIGHT PIN
(a)
Using a plastic hammer, install the new 2 straight pins.
Standard protrusion: 5 mm (0.197 in.)
5 (0.197)
A65695
–
CYLINDER HEAD ASSY
09201–10000, 09201–01055, 09950–70010
(09951–07100)
14–141
Advertisement
