Table of Contents
Advertisement
Releasing the button causes the window to halt immediately.
The window can be completely opened automatically by briefly pressing the
down button as far as the stop. Renewed pressing of the button causes the
window to stop immediately.
Closing
›
Lightly press the appropriate button up and hold it until the window has
moved into the desired position.
Releasing the button causes the window to halt immediately.
The window can be completely closed automatically by briefly pressing the up
button as far as the stop.
Releasing the button causes the window to halt immediately.
Force limit
Read and observe
and
The electrical power window system is fitted with a force limiter.
If there is an obstacle, the closing process is stopped and the window goes
down by several centimetres.
If the obstacle prevents the window from being closed during the next 10 sec-
onds, the closing process is interrupted once again and the window goes down
by several centimetres.
If you attempt to close the window again within 10 seconds of the window be-
ing moved down for the second time, even though the obstacle was not yet
been removed, the closing process is only stopped. During this time it is not
possible to automatically close the window. The force limiter is still switched
on.
The force limiter is only switched off if you attempt to close the window again
within the next 10 seconds - the window will now close with full force!
If you wait longer than 10 seconds, the force limiter is switched on again.
Window convenience operation
Read and observe
and
The convenience operation of the windows offers the possibility of opening or
closing all the windows at once.
on page 61 first.
on page 61 first.
Convenience operation can take place in one of the following ways.
Opening
›
Press and hold the symbol button on the key.
›
Hold the key in the driver's lock in the unlock position.
›
Press and hold he central locking button in the area of the symbol
on page 57.
›
Hold button
» Fig. 41
on page 61 in the opening position.
A
Closing
›
Press and hold the symbol button on the key.
›
Hold the key in the driver's lock in the lock position.
›
Press and hold he central locking button in the area of the symbol
on page 57.
›
Hold button
» Fig. 41
on page 61 in the closing position.
A
›
The KESSY system touch the area
The setting for the window convenience operation is in the MAXI DOT display
in the Window op. menu item.
» page
The prerequisite for ensuring that the convenience operating feature correctly
is the automatic opening/closing of all windows is operational.
Convenience opening or closing the window using the key in the driver's lock
is only possible within 45 seconds after locking the vehicle.
The movement of the window is stopped immediately when the key or the re-
spective button is released.
Operational faults
Read and observe
and
The electric window levers do not work if the vehicle battery has been discon-
nected and connected again while a window was open. The system must be
activated.
Activation sequence
›
Switch on the ignition.
›
Pull the top edge of the button and close the window.
›
Release the button.
›
Pull the relevant button upwards again for approx. 1 seconds, and keep it
pressed down.
» Fig. 35
on page 55 with your fingers.
48.
on page 61 first.
Unlocking and opening
» Fig. 36
» Fig. 36
63
Advertisement
Chapters
Table of Contents
