Skoda Yeti 2015 Operating Instructions Manual page 188

Hide thumbs Also See for Yeti 2015:
Table of Contents

Advertisement

Full wheel trim
Before removing the wheel bolts, remove the wheel cover.
Extracting
Hook the clamp found in the vehicle tool kit
edge of the wheel trim.
Push the wheel wrench through the clamp, support on the tyre and pull off
the wheel trim.
Fitting
Press the wheel trim onto the wheel rim at the designated valve opening
»
.
Then press the trim into the wheel rim until its entire circumference locks
correctly in place.
CAUTION
Notes from the factory or from the ŠKODA Original accessory delivered trim.
When using an anti-theft wheel bolt, make sure that this has been fitted ac-
cording to the position marked on the back of the wheel cover position.
On the back of the wheel cover, the position for the anti-theft wheel bolt is
marked by means of a symbol. If the wheel cover is set outside the position
marked for the anti-theft wheel bolt, there is a risk of damaging the wheel
cover.
CAUTION
Use the pressure of your hand only, do not strike the full wheel trim. The
cover could be damaged.
If wheel trims are fitted, an adequate flow of air must be assured in order to
cool the brake system.
Note
We recommend that you use wheel trims from ŠKODA Original Accessories.
» page 183
into the reinforced
Wheel bolts
Before removing the wheel bolts, remove the covering caps.
Extracting
Push the extraction pliers
» page 183
inner catches of the pliers are positioned at the collar of the cap.
Remove the cap in the direction of the arrow
Fitting
Push the caps onto the wheel bolts up to the stop.
Anti-theft wheel bolts
The anti-theft wheel bolts protect the wheels from theft. These can only be
loosened or tightened with the use of adapter
Remove the full wheel trim or the caps of the wheel bolts.
Insert adapter
» Fig. 173
with the toothed side all the way into the inner
B
teeth in the head of the anti-theft wheel bolts
Push the wheel wrench onto the adapter
Loosen or tighten the wheel bolt
Remove the adapter.
Fig. 172
Remove the cap
sufficiently far onto the cap until the
» Fig.
172.
Fig. 173
Principle sketch: Anti-theft
wheel bolt with adapter
» Fig.
173.
B
.
A
up to the stop.
B
» page
186.
Emergency equipment and self-help
185

Advertisement

Table of Contents
loading

Table of Contents