Table of Contents
Advertisement
No route guidance is carried out
A compass/vehicle symbol is shown to display the current vehicle position in
relation to the compass after selection.
Menu item Audio
Read and observe
on page 46 first.
Select menu item Audio
›
Select and confirm Audio in the main menu.
The information displayed in MAXI DOT display
Radio
■
■
is the currently played station (name/frequency)
The selected frequency range (e.g. FM) optionally with the number of the
■
station button (e.g. FM3), if the station is stored in the memory list
■
List of available station (if more than 5 stations can be received)
TP traffic announcements.
■
Media
■
■
For information on the track
Menu item Telephone
Read and observe
on page 46 first.
Select menu item Phone
›
Select and confirm Phone in the main menu.
›
Turn the dial
» Fig. 30
on page 47.
G
The system displays a call list.
If the call list includes no entries, the following message appears No entries
available.
The following symbols are displayed next to each entry in the call list.
Incoming call
Outgoing call
Missed call
Outgoing call
Hang up - End a call
■
1)
This function is only supported by some mobile phones.
48
Using the system
Incoming call
■
Answer - Answer a call
Reject - Reject a call
■
Current call
■
Hang up - End a call
Hold / Switch on - Hold call / restore call
■
Private / Hands-free - Switch call to the telephone / switch call to the device
■
■
Mic. off / Mic. on - Switch off the microphone / switch on the microphone
Incoming call during an ongoing call
Answer - Accept incoming call and hold the ongoing call
■
■
Reject - Rejects incoming call
Replace Replace the ongoing call with an incoming call
■
On-going and held call
Hang up - End on-going call
■
Switch - Switch from present call to held call
■
Conference - Connect current and held call to the conference call
■
Mic. off / Mic. on - Switch off the microphone / switch on the microphone
■
Conference call
■
Hang up - End conference call
Hold - Hold conference call
■
Mic. off / Mic. on - Switch off the microphone / switch on the microphone
■
Symbols in the display
Charge status of the telephone battery
Signal strength
1)
A telephone is connected to the unit
Missed calls (if there are several missed calls, the number of calls is shown
next to the symbol)
Menu item settings
Read and observe
on page 46 first.
You can change certain settings by means of the display. The current menu
item is shown in the top of the display under a line.
1)
Advertisement
Chapters
Table of Contents
